https://www.sharcnet.ca/Software/Ansys/16.2.3/en-us/help/cfx_thry/i1311648.html
Explanation of time scale control for steady state simulation in CFX:
https://www.sharcnet.ca/Software/Ansys/16.2.3/en-us/help/cfx_mod/i1313401.html
Variables and Predefined Expressions Available in CEL Expressions:
https://www.sharcnet.ca/Software/Ansys/16.2.3/en-us/help/cfx_ref/i1304139.html
CFX Expression Language Statements:
https://www.sharcnet.ca/Software/Ansys/17.0/en-us/help/cfx_ref/i1304102.html
Introducing additional variables and their transport equations in CFX:
https://www.sharcnet.ca/Software/Ansys/16.2.3/en-us/help/cfx_thry/i1413398.html
https://www.sharcnet.ca/Software/Ansys/16.2.3/en-us/help/cfx_mod/i1298972.html
Additional variables in multiphase flow
https://www.sharcnet.ca/Software/Ansys/16.2.3/en-us/help/cfx_thry/i1411696.html
Solve axisymmetric "2D" problem with CFX:
For axisymmetric 2D geometries, apply symmetry conditions to the high-theta and low-theta planes unless there is swirl anticipated in the flow, in which case 1:1 periodic connections should be applied instead. Do not use GGI periodic connections; doing so will hurt accuracy. The extrusion rotation angle for axisymmetric geometries should be small (eg. 1 to 5 degrees).
https://www.cfd-online.com/Forums/cfx/21753-can-cfx-5-7-solve-axisymmetric-problem-2-d.html
https://www.cfd-online.com/Forums/ansys/194505-how-setup-2d-simulation-cfx.html
https://www.sharcnet.ca/Software/Ansys/16.2.3/en-us/help/cfx_mod/i7404064.html
http://www.padtinc.com/blog/the-focus/ansys-cfx-going-2d-in-cfx
Import 2D mesh to CFX:
http://www.eureka.im/2268.html
https://www.sharcnet.ca/Software/Ansys/16.2.3/en-us/help/cfx_pre/BABCCFBE.html#BABECEFI
Difference between CFX and Fluent:
https://www.cfd-online.com/Forums/cfx/166388-cfx-vs-fluent.html
Dimensionless wall distance (y plus):
https://www.cfd-online.com/Wiki/Dimensionless_wall_distance_(y_plus)
y plus calculator:
http://www.pointwise.com/yplus/
Friction velocity:
https://www.cfd-online.com/Wiki/Friction_velocity
The ICEM Guide for CFX Users (Recommendation for mesh quality)
https://www.cfd-online.com/Forums/ansys-meshing/161772-icem-guide-cfx-users.html
Export boundary conditions from another simulation and import as BC for current simulation:
https://www.cfd-online.com/Forums/cfx/25655-possible-import-boundary-conditions.html
https://www.youtube.com/watch?v=tmfvOML-ygQ
Explanation of minimum volume fraction in CFX:
https://www.sharcnet.ca/Software/Ansys/16.2.3/en-us/help/cfx_mod/i1384393.html
Wall function in CFX:
https://www.sharcnet.ca/Software/Ansys/16.2.3/en-us/help/cfx_thry/cfxTurbModeMath.html
Exporting Plane Data from ANSYS-CFX to Excel:
http://cfd2012.com/exporting-plane-data.html
Import/initialize profile data in CFX Pre:
https://www.sharcnet.ca/Software/Ansys/16.2.3/en-us/help/cfx_mod/i1301637.html
Curvature Correction for Two-Equation Models
https://www.sharcnet.ca/Software/Ansys/17.0/en-us/help/cfx_thry/i1302321.html
How to disable solution equation:
https://www.cfd-online.com/Forums/cfx/128003-how-disable-solution-equation.html
Redlich Kwong real gas equation of state for refrigerant:
https://www.sharcnet.ca/Software/Ansys/16.2.3/en-us/help/cfx_mod/cfxRealSettUsin.html
Equivalent sand-grain roughness:
A Simple Algorithm to Relate Measured Surface Roughness to Equivalent Sand-grain Roughness
fluent-intro_15.0_l07_turbulence.pdf |
pipeflow_intro (explanation of power-law velocity profile).pdf |
lecture_no3_turbulent_flow_modelling.pdf |